News Category

A Must-see for Bewbies! How to Operate the Aerial Work Vehicle

Views : 127
Author : Chengli CLW Group
Update time : 2022-02-19 18:32:10

Due to its characteristics, the aerial work basket truck determines that the master driving it must be experienced, so is it impossible for novices to operate it? Today, let's take a look at a few key places:

(Isuzu double cabin 16 meters folding aerial truck)

 

1. The elements of the processing and installation of parts and components of aerial work manlift truck have rough surfaces, small touch areas, and uneven load bearing, which will cause greater wear and tear. During the operation of the aerial work basket truck, the concave and convex parts on the surface of the parts fit into each other and conflict with each other, and the metal chips that fall off are used as abrasives to continue to participate in the conflict, which speeds up the wear of the cooperative surface of the parts. Therefore, during the break-in period of the aerial work basket truck, the wear of the parts is simply constituted, and the wear speed is fast. At this time, if the aerial work basket truck is overloaded, it may cause damage to the parts and cause some problems.

 

2. When driving an aerial work basket truck, you should stabilize the steering wheel, quickly move your foot from the accelerator pedal to the brake pedal, and decide how hard you press it according to your needs. "Spot parking" is the basic method for practicing smooth parking. When driving on wet and slippery roads such as rain and snow, emergency braking is strictly prohibited. Using emergency braking can cause the vehicle to go out of control and cause unexpected situations. The correct method should be to use the traction force of the engine to reduce the speed of the vehicle, and at the same time use the method of "pointing the brakes and engaging in a low gear to make the vehicle slow down or stop in the shortest possible distance.

 

3. It should be noted that the technical requirements for releasing the accelerator pedal are to keep the vehicle smooth at all times. Fuel reduction is another direct method of controlling the speed of an aerial work basket truck. Due to the loosening and oscillation of the parts of the aerial work basket truck and the influence of the heating of the machine, the sealing surface of the machine and the pipe joints will show leakage; some defects such as casting and processing are difficult to find during installation and debugging, but because of the operation process Oscillation and impact effects in the motor, this shortcoming is exposed, manifested as leakage (seepage) oil (water). Under normal circumstances, when the road conditions are good or when the aerial work basket truck is running with no load, the accelerator is used to control the speed of the vehicle. The inertia of the engine and the idling operation of the engine overcome the friction and air resistance between the tire and the ground when moving forward, so that the vehicle slowly stops.

(Isuzu double cabin 16 meters folding aerial truck)

 

4. When the aerial work basket truck passes through prosperous road sections, dangerous road sections or encounters obstacles, it is necessary to reduce the speed to control the speed. In order to facilitate the reduction of gears and reduce the gear noise during gear shifting, most modern vehicles are set in the gearbox. Synchronizer. Synchronizer can ensure fast shifting and no gear collision.

 

5. The newly processed and installed parts of the aerial work manlift truck have errors in geometric shapes and cooperative dimensions. In the early stage of use, due to the influence of alternating loads such as shock and vibration, as well as the influence of factors such as heat and deformation, coupled with excessive wear For other reasons, it is easy to loosen the originally fastened parts of the aerial work vehicle. At present, there are still some trucks in our country that do not have a synchronizer in the gearbox. Even for vehicles with a synchronizer in the gearbox, if the "two-leg clutch" method is used to downshift, the service life of the synchronizer and the transmission can be extended.

 

6. Experienced aerial work manlift truck drivers can use predictive taxiing in advance according to the conditions encountered during driving. For example, when the car is driving to an intersection, encountering a red light signal, and there are pits and obstacles ahead, when passing through tunnels, culverts, meeting cars and turning, the methods of reducing fuel and disengaging (or not disengaging) are used to replace the brakes with sliding. This move is not only fuel-efficient and safe, but also reduces the wear and impact of various parts of the vehicle. The training of this technology requires the ability to observe and judge on the basis of fully grasping the technical performance of the vehicle being driven.

 

Because novices do not know much about aerial work basket trucks, or do not understand the operation method, simple operation errors cause problems and even mechanical accidents; operators in this area must learn patiently and only after qualified training can take up jobs.

 

(Isuzu double cabin 16 meters folding aerial truck)